Genuine Land Rover Parts

O-Ring for the oil pump inlet tube, part of the oil pump, sump and filter assembly. It seals the joint at the oil pump inlet (pick-up) tube, keepi...

Screw, M6 x 38mm, from the timing gear assembly - timing chains, tensioners and guides, and the auxiliary drive. It retains the chain guide in pos...

Pin, 6 x 36mm, from the timing gear and auxiliary drive assembly of the 5.0L AJ133 V8 petrol engine. It serves as the guide pin for the auxiliary ...

Heater Hose forming part of the engine cooling system pipework on the 5.0L AJ133 V8 petrol engine, both naturally aspirated and supercharged. It c...

Cam Cover Gasket for the right-hand cylinder head of the 5.0L AJ133 V8 petrol engine, part of the camshaft cover assembly. The gasket seals the jo...

Inlet Manifold Gasket - seals the inlet manifold to the cylinder head on the 5.0L V8 AJ133 naturally aspirated petrol engine. The gasket closes th...

Crankcase Breather Tube - a hose in the crankcase emission control (crankcase ventilation) system on petrol engines. The tube routes blow-by gases...

Inlet Valve - cylinder head inlet (induction) valve for the 5.0L V8 AJ133 supercharged petrol engine. The inlet valve admits the intake charge int...

Exhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...

Exhaust Manifold Gasket - right-hand side seals the exhaust manifold against the cylinder head face on the right-hand bank of the engine. It conta...

Throttle Body and Motor - the electronic throttle assembly in the engine air intake system, mounted between the intake air ducting and the inlet ma...

O-Ring for the engine cooling system - it seals the water outlet tube at its connection to the cylinder block, alongside the thermostat housing. T...

Water Manifold Gasket for the engine cooling and heater circuit - it seals the water manifold tube where it leaves the cylinder block and feeds the...

Camshaft Cover Gasket - LH seals the left-hand camshaft cover to the cylinder head on the AJ133 5.0L V8 petrol engine. It closes the joint around ...

Gasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...

Breather Tube - crankcase ventilation tube within the engine's emission control system. It routes crankcase gases from the engine back into the in...

Oil Cooler - the oil-to-coolant heat exchanger of the engine's Oil Cooler and Filter assembly. Engine coolant is passed through the cooler core to...

Gasket - Oil Filter to Block seals the joint between the oil filter housing and the cylinder block, within the Oil Cooler and Filter assembly. It ...

Idler Pulley for the primary accessory drive of the 5.0L V8 petrol engine (AJ133). It is a free-running, non-tensioning pulley that routes and sup...

Crankshaft Front Oil Seal for the timing gear cover, sealing the crankshaft nose where it passes out through the front cover. It runs on the crank...

Valve Spring Retainer from the cylinder head valve train, the top cap that closes off the valve spring. It sits on top of the valve spring and is ...

Crankshaft Sprocket Washer from the engine timing drive, fitted at the front of the crankshaft beneath the drive sprocket retaining bolt. It sprea...

Timing Gear Bolt from the engine timing drive, securing the camshaft sprocket and variable camshaft timing adjuster to the camshaft. It provides t...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

Door Trim Name Plate - decorative name plate fitted to the visible face of the inner door trim panel. A cosmetic trim item only; it carries no str...

O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Heater Hose - coolant hose serving the cabin heating circuit on the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). It forms part of the coolant path bet...

Coolant Hose - water outlet hose running to the cylinder head, part of the engine cooling circuit on the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). ...

Coolant Hose - inlet tube connector hose in the engine cooling circuit of the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). It carries coolant between ...

Coolant Pipe - Thermostat Housing for the 4.4L AJ-V8 petrol engine - Engine Cooling assembly group. Forms the coolant outlet from the engine and l...

Sensor

Exhaust Clamp - 60mm exhaust joint clamp for the front section of the exhaust system, securing the downpipe to the centre silencer section. Clamps...

Oil Cooler and Filter Assembly for the engine lubrication and cooling circuit. The assembly combines the engine oil cooler with the oil filter hou...

Rear Reflector for the left-hand side of the rear lighting assembly. This is a passive red reflector that returns light from the headlamps of foll...

Rear Reflector, Right-Hand Side - a passive reflex reflector in the rear lighting assembly. Reflects light from following vehicles to improve rear...

Heater Hose for the heater circuit of the 4.2L V8 supercharged petrol engine. This moulded hose carries engine coolant between the cooling system ...

Crankcase Breather Hose forms part of the crankcase emission control (ventilation) system on the 4.4L V8 AJ petrol engine. It carries crankcase bl...

Intake Manifold Gasket - RH seals the intake (inlet) manifold to the cylinder head on the right-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel e...

Intake Manifold Gasket - LH seals the intake (inlet) manifold to the cylinder head on the left-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel en...

Thermostat for the AJ-V8 petrol engine cooling circuit. The thermostat regulates coolant flow between the engine and radiator. It stays closed dur...

Inlet Manifold with integrated rocker (cam) cover for the left-hand cylinder bank. Serves the 3.6L TDV8 diesel engine, carrying intake air to the ...

Inlet Manifold for the right-hand cylinder bank of the 3.6L V8 TDV8 (Lion) diesel engine. Mounted to the cylinder head, the inlet manifold distrib...

Spark Plug for the 4.4L V8 and 4.2L supercharged V8 petrol engines. It ignites the air/fuel mixture in the combustion chamber. One spark plug is r...

EGR Cooler Gasket for the exhaust gas recirculation (EGR) system on the 3.6L V8 diesel engine. It seals the joint between the EGR cooler and its i...