Range Rover L322 Parts

Fuel Injector Refit Kit - the seals and retainer required when removing and refitting a fuel injector on 3.0L V6 and 5.0L V8 supercharged petrol en...

Fuel Injector Refit Kit - the seals and retainer required when removing and refitting a fuel injector on 3.0L V6 and 5.0L V8 supercharged petrol en...

Inlet Manifold Gasket for the right-hand cylinder bank, sealing the inlet manifold to the cylinder head. Seals the joint between the inlet manifol...

Inlet Manifold Gasket for the right-hand cylinder bank, sealing the inlet manifold to the cylinder head. Seals the joint between the inlet manifol...

Inlet Manifold Gasket for the left-hand cylinder bank, sealing the inlet manifold to the cylinder head. Seals the joint between the inlet manifold...

Inlet Manifold Gasket for the left-hand cylinder bank, sealing the inlet manifold to the cylinder head. Seals the joint between the inlet manifold...

O-Ring for the variable valve timing (VVT) solenoid. Seals the VVT solenoid where it locates into the cylinder head, retaining oil pressure to the...

Timing Chain Lubricating Oil Jet for the timing drive of the 5.0L V8 petrol engine (AJ133, naturally aspirated and supercharged). The jet feeds pr...

Auxiliary Drive Chain for the AJ133 5.0L V8 and 3.0L V6 supercharged petrol engines. It forms part of the engine's chain drive assembly, running a...

Spark Plug for the ignition system of the 5.0L V8 AJ133 petrol engine, in both naturally aspirated and supercharged configurations. Threaded into ...

Oil Filter is the engine oil filtration element within the lubrication system, removing wear particles and contaminants from the oil before it circ...

Sealing Ring seals the joint between the engine oil cooler and the water pump on the AJ133 5.0L V8 and 3.0L supercharged V6 petrol engines. It mai...

Oil Cooler Tube forms part of the engine oil cooling circuit, carrying oil between the engine and the oil cooler. Used on 5.0L V8 and 3.0L V6 supe...

Oil Cooler Tube carries engine oil through the oil cooler circuit. The tube connects the engine oil system to the oil cooler, routing oil to be co...

O-ring for the variable valve timing (VVT) solenoid, part of the timing gear assembly at the front of the engine. The solenoid meters oil flow to ...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...

O-Ring for the oil pump inlet tube, part of the oil pump, sump and filter assembly. It seals the joint at the oil pump inlet (pick-up) tube, keepi...

Valve Cover Screw and Sleeve from the cylinder head cover fixings of the petrol V8 and supercharged V6 engines. The screw secures the camshaft (va...

Fan Bracket for the 5.0L V8 petrol engine (AJ133), supplied complete with idler pulley. The bracket mounts to the front of the engine and carries ...

Fuel Injector Seal - Upper - sealing ring for the upper position on the fuel injector, part of the fuel injectors and pipes group on the V8 petrol ...

Oil Level Sensor - electronic engine oil level sensor mounted in the wall of the sump, forming part of the engine lubrication monitoring circuit. ...

Crankshaft Sprocket Washer from the engine timing drive, fitted at the front of the crankshaft beneath the drive sprocket retaining bolt. It sprea...

Screw, M6 x 38mm, from the timing gear assembly - timing chains, tensioners and guides, and the auxiliary drive. It retains the chain guide in pos...

Crankshaft Seal & Retainer – Rear is the rear main oil seal together with its carrier plate, mounted to the rear face of the cylinder block on ...

Oil Level Sensor - electronic engine oil level sensor mounted in the wall of the sump, forming part of the engine lubrication monitoring circuit. ...

Lower chain guide for the auxiliary drive chain, part of the timing gear assembly on the 5.0L V8 petrol engine (AJ133). The guide runs against the...

Fuel Injector Seal - Lower is the lower sealing ring fitted to the fuel injector, within the fuel injector and pipe assembly of the 4.4L V8 (AJ) pe...

Crankshaft Position Sensor for diesel engine management, located at the cylinder block and block stiffener assembly facing the crankshaft. The sen...

Inlet Manifold Gasket for the left-hand cylinder bank of the 5.0 litre V8 petrol engine (AJ133). It seals the joint between the inlet manifold and ...

Inlet Valve - cylinder head inlet (induction) valve for the 5.0L V8 AJ133 supercharged petrol engine. The inlet valve admits the intake charge int...

Vacuum Hose running from the inlet manifold to the symposer on supercharged petrol engines. The symposer is an intake resonator that channels indu...

Inlet Manifold Gasket for the left-hand cylinder bank of the 5.0 litre V8 petrol engine (AJ133). It seals the joint between the inlet manifold and ...

Oil Level Sensor - electronic engine oil level sensor mounted in the wall of the sump, forming part of the engine lubrication monitoring circuit. ...

Vacuum Pump Seal - sealing ring between the engine-driven vacuum pump and its mounting face on the engine, forming part of the brake servo vacuum c...

Vacuum Pump Seal - sealing ring between the engine-driven vacuum pump and its mounting face on the engine, forming part of the brake servo vacuum c...

Crankshaft Position Sensor for engine management, mounted in the lower cylinder block and oil pan area facing the crankshaft reluctor ring. As the...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...

Intercooler to Inlet Manifold Gasket from the charge air induction system of the supercharged 5.0L V8 petrol engine (AJ133). The supercharger and ...

Inlet Manifold Gasket - seals the inlet manifold to the cylinder head on the 5.0L V8 AJ133 naturally aspirated petrol engine. The gasket closes th...

Accessory Drive Belt - ribbed serpentine belt for the front-end accessory drive of the 5.0L naturally aspirated V8 petrol engine. Driven from the ...

Sensor Assembly

Inlet Manifold Gasket - seals the inlet manifold to the cylinder head on the 5.0L V8 AJ133 naturally aspirated petrol engine. The gasket closes th...

Exhaust Valve for the cylinder head of the 5.0L V8 petrol engine (AJ133), naturally aspirated and supercharged. It seals the exhaust port against ...

Accessory Drive Belt - ribbed serpentine belt for the front-end accessory drive of the 5.0L naturally aspirated V8 petrol engine. Driven from the ...

Valve Cover Stud and Sleeve from the cylinder head cover fixings of the petrol V8 and supercharged V6 engines. The stud threads into the cylinder ...