Range Rover Sport L320 Parts

Exhaust Manifold Gasket - right-hand side seals the exhaust manifold against the cylinder head face on the right-hand bank of the engine. It conta...

Accessory Drive Belt - ribbed serpentine belt for the front-end accessory drive of the 5.0L naturally aspirated V8 petrol engine. Driven from the ...

Idler Pulley for the front auxiliary drive belt on the 2.7 and 3.0 V6 diesel engines, part of the pulleys and drive belts assembly at the front of ...

Ride Height Sensor for the rear of the electronic air suspension system. It measures the position of the rear suspension arm relative to the body a...

Crankcase Ventilation Tube for the 3.0L V6 diesel, part of the crankcase ventilation circuit and located at the oil pan. The tube forms the sectio...

Side Repeater Lamp - Front - Exterior Lighting assembly group, direction indicator circuit. Mounted in the front wing panel ahead of the door and ...

Headlight Switch is the dashboard rotary lighting switch mounted in the facia lighting panel. It switches the side, dip and main-beam lighting cir...

Valve Spring Retainer from the cylinder head valve train, the top cap that closes off the valve spring. It sits on top of the valve spring and is ...

Oil cooler seal, 9.5 mm diameter, sealing the small-bore oil transfer connection between the engine and the oil filter housing on the 3.0L V6 diese...

Idler Pulley for the primary accessory drive of the 5.0L V8 petrol engine (AJ133). It is a free-running, non-tensioning pulley that routes and sup...

Exhaust Gas Temperature Sensor for diesel exhaust aftertreatment, fitted on the right-hand side of the exhaust in the front pipe and catalyst area ...

Gasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...

Exhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...

Exhaust Manifold Gasket - right-hand side seals the exhaust manifold against the cylinder head face on the right-hand bank of the engine. It conta...

Sensor - Crankshaft Position - CPS

Tube - Drain

Thermostat for the engine cooling circuit of the 2.7 V6 Lion turbo diesel, supplied as the thermostat and water outlet connection assembly. The th...

Oil Seal for the oil level sensor where it passes through the wall of the oil pan (sump). The sensor is retained in the sump and this ring forms t...

Front Brake Disc - vented - the rotating friction element of the front disc brake assembly. The disc provides the surface the front caliper pads c...

Front Brake Disc - vented - the rotating friction element of the front disc brake assembly. The disc provides the surface the front caliper pads c...

Rear upper suspension arm bush kit - front mounting position in the rear independent suspension arm assembly. The bush locates the forward eye of ...

Cylinder Head Bolt secures the cylinder head to the engine block on V6 and V8 petrol engines. Threaded M11 x 178 mm. Twenty bolts are required per...

Cylinder Head Bolt secures the cylinder head to the engine block on V6 and V8 petrol engines. Threaded M11 x 178 mm. Twenty bolts are required per...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Tyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...

Timing Chain Tensioner Blade is the tensioner blade in the engine's timing chain drive. It provides the curved, low-friction face that the timing c...

Exhaust Manifold Gasket seals the exhaust manifold to the turbocharger on the 3.0L V6 diesel engine. Fitted at the manifold-to-turbocharger flange...

Upper Suspension Arm Bush Kit - Front - a set of four polyurethane bushes covering both the front and rear mounting positions of the front upper su...

Water Outlet Tube carries engine coolant within the cooling circuit of the 5.0L V8 petrol engine (AJ133). It runs from the thermostat housing to t...

Shock Absorber Boot - Rear

Shock Absorber Boot - Rear

Shock Absorber Boot - Rear

Ride Height Sensor for the electronic air suspension system, monitoring rear ride height. The sensor links to the rear suspension arm and reports ...

Automatic Transmission Fluid (ATF), supplied in a 1 litre container. Specified for the automatic transmission and, where applicable, the power ste...

Automatic Transmission Fluid (ATF), supplied in a 1 litre container. Specified for the automatic transmission and, where applicable, the power ste...

Air-Conditioning O-Ring, 11 x 2.5 mm for the refrigerant circuit. The seal is fitted at the compressor-to-condenser connection, holding a leak-tig...

Fully synthetic engine oil, SAE 5W-30 - 1 litre container. Engine lubrication system. Formulated for applications specifying Ford WSS-M2C913-D, an...

Fully synthetic engine oil, SAE 5W-30 - 5 litre container. Engine lubrication system. Formulated for applications specifying Ford WSS-M2C913-D, an...

Fully synthetic engine oil, SAE 5W-30, ACEA C1 - 5 litre container. Engine lubrication system. ACEA C1 is a low-SAPS classification - reduced sulp...

Rear lower suspension arm bush kit - front mounting position in the rear independent suspension arm assembly. This bush carries the forward eye of...

Fully synthetic engine oil, SAE 5W-30, ACEA C1 - 1 litre container. Engine lubrication system. ACEA C1 is a low-SAPS classification - reduced sulp...