Products

Coolant Tube for the engine cooling circuit, a rigid pipe carrying coolant between sections of the circulation system. It routes coolant flow alon...

Oil Cooler Assembly

Radiator Fan Cowl - the upper section of the cooling fan shroud in the engine cooling pack, sitting between the top of the radiator and the engine-...

Radiator Fan Shroud - the lower section of the cooling fan housing, fitted behind the radiator around the bottom of the engine-driven cooling fan. ...

Air Duct - the induction duct of the air cleaner assembly, carrying filtered air from the air cleaner outlet to the turbocharger compressor inlet. ...

Element - Air Cleaner

Air Cleaner to Airflow Meter Seal seals the joint between the air cleaner housing outlet and the airflow meter in the engine air intake tract. It m...

Fuel Cooler for the diesel fuel return circuit. Mounted in the return line between the fuel injection system and the tank, it dissipates heat pick...

Coolant Hose for the engine cooling circuit, forming the return leg from the fuel cooler. On the 2.5L five-cylinder turbo-diesel (Td5), the fuel co...

Intercooler Hose - LH carries compressed charge air through the intercooler circuit on the 2.4L Puma turbo diesel. It forms part of the ducting th...

Turbo Drain Gasket for the Td5 turbocharger oil drain. The gasket seals the joint where the oil return (drain) pipe meets the underside of the tur...

Drive Belt Idler Assembly for the front-end auxiliary drive system. The idler runs on the outer face of the auxiliary (serpentine) drive belt, guid...

Idler Tensioner Pulley for the auxiliary (serpentine) drive belt system. Mounted on the automatic belt tensioner arm, the pulley bears against the ...

Auxiliary Drive Belt for the front-end accessory drive system, transmitting drive from the crankshaft pulley to the alternator and other engine anc...

Drive Belt Bracket and Bearing for the auxiliary (accessory) drive belt system. The bracket mounts to the engine and locates a pulley within the a...

Double Clip for routing and securing battery cables. This twin clip retains two leads together, holding the cabling in place along its run.

Coolant Temperature Sensor - screws into the thermostat housing as part of the engine cooling system. It senses coolant temperature in the thermos...

Rear Fog Lamp Switch for the facia switch panel. The switch operates the rear fog lamp within the exterior lighting circuit.

Wiper Drive Tube is part of the windscreen wiper drive mechanism, guiding the drive between the wiper motor and the wheelboxes. It houses the flex...

Wire - Fuel Injection Valve

Voltage Sensitive Switch - a 45-amp voltage-sensitive relay used in the vehicle's auxiliary charging and accessory circuits. The switch monitors s...

Rear Wash/Wipe Switch - the fascia-mounted contact switch that controls the rear screen wash and wipe functions. It operates the rear washer pump ...

Cigar Lighter Knob - the removable knob and heating element of the cigar lighter, part of the body electrical ancillaries. The knob pushes into th...

Conv Grommet

Cable Clip for securing and routing cables and wiring to body and chassis structures.

Washer Bottle - the washer fluid reservoir for the windscreen, rear screen and headlamp wash circuits. It stores the washer fluid and carries the ...

Plug Glow Wire Assembly

Front Screen Timer Relay is the grey timer relay within the heated front windscreen circuit. When the heated screen is switched on, this relay ene...

Rear Fog Lamp forming part of the rear lighting assembly, providing a high-intensity red rear light for use in poor visibility. It operates on its...

Speedometer for the instrument cluster, displaying road speed on non-EFI applications. It mounts in the dashboard instrument panel and is driven b...

Split Pin used to secure the accelerator cable and hand throttle cable connections, retaining the clevis pin at the cable-to-linkage joint. After ...

Split Pin is a 1.5 mm x 10 mm securing pin used to lock a castellated nut or to retain a clevis pin. It passes through a drilled hole, and its two ...

Split Pin used throughout the handbrake and gearchange linkages. The pin passes through a clevis pin or castle nut and its legs are spread on asse...