Products

O-Ring seals the joint between the sump and the ladder-frame assembly on the 2.5L 200TDi diesel engine.

Exhaust Downpipe is the cast front section of the exhaust system for the 200TDi and 300TDi diesel engines. It bolts to the turbocharger outlet and...

Flywheel Dowel is a locating dowel that registers the flywheel to the crankshaft rear flange. Pressed into the crankshaft flange, it sets the angu...

Front Crankshaft Oil Seal seals the front of the crankshaft where it passes through the timing cover. It prevents oil loss at the crankshaft pulle...

Valve Stem Seal for the Rover V8 engine, part of the cylinder head valve train. The seal fits over the top of the valve stem where it passes throu...

Oil Level Indicator (Dipstick) Assembly for the Rover V8 petrol engine. The dipstick locates in the dipstick tube and allows the engine oil level ...

Oil Pump Gasket for the Rover V8 petrol engine lubrication system. This gasket seals the oil pump to its mating face, maintaining oil pressure and...

Rocker Cover Gasket for the 2.5L 300TDi diesel engine, sealing the interface between the rocker cover and the cylinder head. Installed at the top ...

Cruise Control Switch for the vehicle cruise control system. It carries the driver's control inputs to the cruise control, allowing the held set sp...

Crankshaft Oil Seal - Rear seals the rear of the crankshaft where it leaves the cylinder block at the flywheel end, retaining oil within the bottom...

Key - Mainshaft

Crankshaft Timing Chain Sprocket The drive sprocket mounted on the nose of the crankshaft within the timing chain drive of the Rover V8 petrol engi...

Coolant Hose, Plenum Chamber, for the V8 EFI petrol engine. It carries coolant to the water-heated jacket at the intake plenum chamber, part of the...

Oil Filter for Land Rover petrol and diesel engines, part of the engine lubrication circuit. This screw-on canister filter threads onto the filter...

Cam Cover Sealing Washer Seals a camshaft cover retaining bolt on the 300 TDi 2.5L turbo diesel engine. Fitted beneath the head of the cam (rocker...

Fuel Spill Pipe forms part of the fuel injection system on the 2.5L 200TDi turbo diesel engine. It links the injector leak-off unions, collecting ...

Camshaft for the Rover V8 EFI petrol engine (3.9L, 4.0L and 4.6L variants). Mounted centrally in the cylinder block, the camshaft is driven from t...

Tensioner Pulley with Bracket operates in the auxiliary (accessory) drive belt system of the V8 EFI petrol engine. The pulley bears against the dr...

Throttle Position Sensor (Potentiometer) for V8 petrol engines with Electronic Fuel Injection (EFI). Mounts on the throttle body and signals throt...

Flywheel Bolt securing the flywheel to the rear flange of the crankshaft. Used on four-cylinder petrol and diesel engines, including the 200TDi an...

Injector Sealing Washer seals each fuel injector into the cylinder head within the diesel fuel injection system, for 200 TDi and 300 TDi turbo-dies...

Sound Deadening Pad is an acoustic pad fitted to the rocker cover on the 2.5L 300TDi turbo diesel engine. It damps mechanical noise radiating from...

Valve Spring for the cylinder head valvetrain. Fitted over the valve stem, it holds the valve closed against its seat and keeps the follower in con...

O-ring

Tappet Adjusting Screw for the 2.5L 300 TDi turbocharged diesel engine, fitted in the rocker arm of the valvetrain. Threaded into the rocker arm t...

Head Shield for the exhaust gas recirculation (EGR) system. The shield protects adjacent components from the heat carried by the exhaust gas as it...

O-Ring - Oil Pump Housing Seal is the sealing O-ring fitted within the oil pump housing on the 200TDi 2.5L 4-cylinder turbo diesel engine. The O-r...

Tappet Adjusting Screw for the 2.5L 200 TDi diesel engine. It threads into the rocker arm on the rocker shaft assembly and bears on the valve stem,...

Seal - Oil Pump

Exhaust Manifold Bolt for the Rover V8 petrol engine, threaded 3/8" UNC and 1 1/8" long. The bolt secures the exhaust manifold to the cylinder hea...

Exhaust Manifold Bolt for the Rover V8 petrol engine, threaded 3/8" UNC and 1 1/8" long. The bolt secures the exhaust manifold to the cylinder hea...

Oil Seal Housing Gasket for the 300 TDi engine, sealing the rear crankshaft oil seal housing to the rear face of the cylinder block. The gasket fo...

Exhaust Manifold for the V8 EFI petrol engine. It bolts to the cylinder head and collects exhaust gases from the cylinder ports, directing them in...