Genuine Land Rover Parts

Transfer Shift Control Module - the electronic control unit that manages range shifting in the two-speed transfer case, commanding the shift actuat...

Front Cylinder Cover - a cover that closes off the front face of the cylinder block, sealing the opening and enclosing the components behind it. F...

Assist Handle mounted to the headlining above the rear passenger doors. The grab handle fixes to the roof rail and gives rear occupants a hold whe...

Thermostat Housing for the engine cooling circuit. It houses the coolant thermostat and directs coolant flow, opening the path to the radiator once...

Idler Pulley for the front-end accessory belt drive, 90mm diameter. The idler routes and guides the auxiliary drive belt around the accessory pull...

Thermostat Housing for the 2.0L Ingenium petrol engine (AJ200P, including PHEV applications). The housing holds the coolant thermostat and forms p...

Wiper Blade for the windscreen wiper assembly. The blade fits onto the wiper arm and sweeps the windscreen to clear rain and road spray, maintaini...

Hex Flange Nut, an M8 flanged nut used to secure the exhaust manifold and turbocharger fixings on V6 and V8 diesel engines. The integrated flange ...

Oil Pump Gasket that seals the oil pump to the cylinder block within the engine lubrication system, for the 3.0L V6 diesel engine. It maintains th...

Thermostat for the 2.0L Ingenium diesel engine (AJ200D) cooling system. It regulates coolant flow to bring the engine up to operating temperature q...

Engine Mounting Bracket - a structural bracket within the engine mounting system. The bracket bolts to the engine and locates the engine mount, ca...

Cover Gasket for the crankcase cover, part of the emission-control and crankcase ventilation system on the 2.0L AJ200 four-cylinder diesel engine. ...

Cylinder Head Gasket for the left-hand cylinder head of the 3.0L DOHC GDI supercharged V6 petrol engine. Seals the machined joint between the left...

Cylinder Head Gasket seals the joint between the right-hand cylinder head and the engine block on the 3.0L DOHC supercharged GDI V6 petrol engine. ...

Exhaust Gas Pressure Sensor for the exhaust and emissions system on 2.0L AJ200P Ingenium petrol and plug-in hybrid applications. The sensor measur...

NOx Trap Temperature Sensor within the diesel exhaust aftertreatment system. Mounted in the exhaust stream at the NOx trap, the sensor reports exh...

Diesel Exhaust Fluid (AdBlue) for diesel vehicles fitted with a selective catalytic reduction (SCR) exhaust after-treatment system. The fluid is h...

Primary Fuel Filter for the diesel fuel supply system. Positioned upstream of the high-pressure injection circuit, it removes particulate contamina...

Fuel Sender and Pump is the in-tank fuel delivery module combining the electric fuel pump with the fuel level sender unit, mounted inside the fuel ...

Accessory Drive Belt - multi-rib belt driving the engine's front-end accessories. Transmits crankshaft rotation to the belt-driven ancillaries wit...

Coolant Bleed Hose - bleed hose running from the engine to the coolant expansion tank. Fitted to the 2.0L four-cylinder AJ200 petrol engine, it ve...

O-Ring - seals the upper joint of the thermostat housing. Fitted to 3.0L supercharged V6 and 5.0L V8 petrol engines, it maintains a leak-tight coo...

Coolant Flow Control Valve for the cooling circuit of the 5.0L supercharged V8 petrol engine (AJ133). Regulates coolant flow within the engine coo...

Front End Assembly - the forward body structure that ties the front panels, aprons and side members into a single front-end unit. It forms the fram...

Bumper Grille is a front bumper grille within the front bumper assembly, fitted to the standard (non-SVR) bumper. It sits in the front bumper open...

Brake Pad Wear Wire - front brake pad wear warning wire within the braking system. Routed to the front brake pad, the wire completes a circuit tha...

Transmission Mount Insulator locating the transmission mounting bracket. The rubber-to-metal insulator supports the transmission against the body ...

Oil Pump for the engine lubrication system of the supercharged petrol V6 and V8 (AJ133) engines. Driven from the crankshaft, the oil pump draws oi...

Hex Head Bolt - M14 x 148mm fastener used at the front crossmember and stabiliser bar, front suspension arm, rear bumper and tow bar mountings. A ...

O-Ring - seals a joint in the thermostat housing and EGR cooling circuit. Fitted to the 2.0L four-cylinder AJ200 diesel engine, it maintains a lea...

Water Pump for the engine cooling circuit, fitted to supercharged petrol applications (3.0L DOHC GDI supercharged V6 and 5.0L AJ133 DOHC supercharg...

Flywheel Bolt - hex head fastener that secures the flywheel to the rear crankshaft flange within the engine driveline assembly. Fitted to the 3.0L...

Oil Filter for the engine lubrication system. Filters contaminants from the engine oil, protecting the lubrication circuit. Fitted to the 2.0L 16V...

Oil Pump for the 3.0L V6 diesel engine lubrication system. The pump draws oil from the sump and delivers it under pressure to the engine oil galle...

Sealing Ring for the oil level sensor connection at the sump. Seals the oil level sensor wiring connector where it passes through the oil pan (sum...

Vacuum Pump Gasket sealing the vacuum pump to the engine. Forms the joint between the vacuum pump and its mounting face, maintaining the seal for ...

Camshaft Sprocket A component of the timing gear that transmits drive from the timing chain to the camshaft, keeping valve operation synchronised w...