Products

Injector Refit Kit supplying the seals needed to refit a fuel injector on petrol engines. It restores the sealing interface between the injector an...

Thermostat Seal for the thermostat housing on AJ200/AJ20 series petrol and diesel engines. It seals the thermostat housing joint within the cooling...

Engine Mounting Bracket - a structural bracket within the engine mounting system. The bracket bolts to the engine and locates the engine mount, ca...

Oil Pump Gasket that seals the oil pump to the cylinder block within the engine lubrication system, for the 3.0L V6 diesel engine. It maintains th...

Hex Flange Nut, an M8 flanged nut used to secure the exhaust manifold and turbocharger fixings on V6 and V8 diesel engines. The integrated flange ...

Wiper Blade for the windscreen wiper assembly. The blade fits onto the wiper arm and sweeps the windscreen to clear rain and road spray, maintaini...

Thermostat Housing for the 2.0L Ingenium petrol engine (AJ200P, including PHEV applications). The housing holds the coolant thermostat and forms p...

Idler Pulley for the front-end accessory belt drive, 90mm diameter. The idler routes and guides the auxiliary drive belt around the accessory pull...

Thermostat Housing for the engine cooling circuit. It houses the coolant thermostat and directs coolant flow, opening the path to the radiator once...

Fuel Pressure and Temperature Sensor for petrol fuel-injection systems. The combined sensor measures fuel rail pressure and fuel temperature and r...

Front Cylinder Cover - a cover that closes off the front face of the cylinder block, sealing the opening and enclosing the components behind it. F...

Towing Hook Cover is the blanking cover that closes the towing eye aperture in the rear bumper fascia. When the screw-in recovery hook is not fitt...

Door Latch Actuator for a front door, part of the central locking system. The unit combines the door latch with the electric actuator that locks a...

Door Latch Actuator for a rear door, part of the central locking system. The unit combines the door latch with the electric actuator that locks an...

Air Suspension Compressor The pump that generates and supplies compressed air to the four-corner electronic air suspension system. Driven by an el...

Dual-Tone Electric Horn producing a combined high and low note, part of the vehicle's audible warning system. Supplied with its mounting bracket.

Camshaft Cover - cam cover sealing the top of the cylinder head over the camshafts and valvetrain, for the 3.0L DOHC supercharged GDI V6 petrol eng...

Door Trim Panel for the front door. The trim panel finishes the inner face of the front door, covering the door structure and mechanisms and carry...

Front Stabilizer Bar Insulator for the front anti-roll bar mounting. This bush locates the front anti-roll (stabilizer) bar to the vehicle structu...

Dirty Air Duct Guide for the engine air intake system. The guide locates and supports the dirty air duct, the unfiltered-air inlet duct that carri...

Cooling Fan Motor in the engine cooling system, driving the radiator cooling fan. The motor spins the fan to draw air through the radiator, dissip...

Oil Filter Gasket from the oil cooler and filter housing assembly of the 4.4L DOHC DITC V8 diesel. The gasket seals the oil filter housing against...

Oil Cooler Gasket for the engine oil cooler and filter housing assembly on the 4.4L DOHC DITC V8 diesel. Seals the joint face between the oil filt...

Oil Cooler Assembly is the combined engine oil cooler and filter assembly within the engine lubrication and cooling circuit. It passes hot engine ...

Camshaft Cover for the 5.0L V8 AJ133 supercharged petrol engine. It closes the top of the cylinder head, enclosing the overhead camshafts and valve...

Cylinder Head Cover (Camshaft Cover) for the 5.0L V8 AJ133 petrol engine, naturally aspirated and supercharged applications. The cover bolts to th...

Front Suspension Arm - upper front control arm for the right-hand side of the front suspension. It links the chassis to the top of the front wheel...

Front Suspension Arm - upper front control arm for the left-hand side of the front suspension. It links the chassis to the top of the front wheel ...

Grille - Dirty Air Duct for the engine air intake and filtration assembly. Fits over the mouth of the dirty air duct on the front fender support, ...

Stud for the exhaust manifold and turbocharger mounting joints. Locates and retains the manifold-to-cylinder-head and turbocharger-to-manifold joi...

Coolant Hose for the engine cooling circuit on supercharged petrol engines. A moulded coolant line with pre-formed bends, so it seats along its in...

Fender Mounting Bracket, Upper Right-Hand - front body structure, at the joint between the dash panel and the front fender (wing). The bracket for...

Valve stem seal for the cylinder head valve train. The seal locates on the valve guide and wipes the valve stem as it reciprocates, metering the s...

Stop light switch for the brake pedal box assembly. The switch mounts in the pedal box behind the brake pedal and is operated by the pedal arm as ...

Front bumper mounting bracket, right-hand side, in the front bumper cover mounting assembly. The bracket carries the upper outer corner of the fro...

Front bumper mounting bracket, left-hand side, in the front bumper cover mounting assembly. The bracket carries the upper outer corner of the fron...

Module - Transfer Shift Control

Door Handle Gasket - sealing gasket for the exterior door handle and lock assembly, part of the door closures group. It sits between the handle es...

Compressed Air Hose - charge air duct in the intercooler circuit of the 3.0L V6 Gen2 turbo diesel engine. It carries cooled, pressurised charge ai...

Water Outlet Connection - coolant outlet component in the engine cooling circuit of the 3.0L DOHC GDI supercharged V6 petrol engine. It forms the ...

Timing Belt Pulley, Upper from the upper timing gear, right-hand side. It guides the timing belt around the upper drive components and maintains c...

Cylinder Head Gasket sealing the cylinder head to the cylinder block. It contains combustion pressure at each bore and seals the coolant and oil g...

Transmission Oil Cooler - heat exchanger in the automatic transmission cooling circuit, mounted in the front cooling pack alongside the radiator an...

Coolant Bleed Hose - small-bore hose in the engine cooling system, running from the cylinder head bleed point to the coolant expansion tank. It ve...