Products

Fuel Injector Refit Kit - the seals and retainer required when removing and refitting a fuel injector on 3.0L V6 and 5.0L V8 supercharged petrol en...

EGT Sensor - an exhaust gas temperature sensor located at the front of the diesel particulate filter (DPF). It monitors the exhaust gas temperatur...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

EGR Outlet Gasket seals the outlet joint of the exhaust gas recirculation (EGR) assembly. Fitted to the 3.0L V6 diesel (TDV6) engine, it forms a g...

Suspension Arm Bolt secures a front suspension arm to its mounting on the chassis/subframe, part of the front suspension arm mounting hardware. Th...

Brake Disc - front axle, vented, 360mm - operating in the hydraulic disc brake circuit at the front wheels. The internally vented construction cha...

Water Pump for the fuel-fired heater (FFH) circuit. This auxiliary electric pump circulates coolant through the fuel-fired pre-heater. It moves he...

Vacuum Pump Seal - the sealing ring for the engine-mounted vacuum pump. The vacuum pump generates the vacuum used by the brake servo; this seal cl...

Oil Cooler Assembly for the 5.0-litre supercharged V8 petrol engine (AJ133). It forms part of the engine lubrication circuit, transferring heat fro...

Brake Booster for the brake hydraulic system. It sits between the brake pedal and the master cylinder, using engine vacuum to multiply the force ap...

Tailgate Switch operates within the powered tailgate and luggage compartment locking controls. The switch signals tailgate release, actuating the ...

Oil Filter and Cooler is a combined assembly within the engine lubrication circuit, integrating the oil filter housing with the engine oil cooler. ...

Fuel Supply Manifold distributes fuel to the injectors on the left-hand cylinder bank of the 3.0L V6 diesel engine. It forms part of the engine's ...

Macpherson Strut

Damper assy RR Sport Genuine

Inlet Valve for the supercharged 3.0L V6 petrol engine (AJ126). The inlet valve seals against its seat in the cylinder head and opens on the intake...

Upper Inlet Manifold Gasket for the supercharged 3.0L V6 petrol engine. It seals the joint at the upper section of the two-piece inlet manifold, ma...

Upper Inlet Manifold Gasket for the supercharged 3.0L V6 petrol engine. It seals the joint at the upper section of the two-piece inlet manifold, ma...

Lower Inlet Manifold Gasket for the supercharged 3.0L V6 petrol engine. It seals the lower section of the inlet manifold to the cylinder head, seal...

Fuel Filter - the primary fuel filter in the low-pressure supply circuit of the 3.0L V6 diesel engine. Positioned between the fuel tank delivery l...

Rear Anti-Roll Bar Link is the left-hand drop link connecting the rear stabilizer (anti-roll) bar to the suspension. Compatible with both conventi...

Crankshaft Seal - Rear - 1.5 mm seals the rear of the crankshaft where it exits the cylinder block at the flywheel and drive plate end. Supplied c...

Anti-Roll Bar - Rear - Active is the rear stabiliser bar for vehicles fitted with Active Cornering Enhancement (ACE). The ACE system uses a hydrau...

Turbocharger - the left-hand (secondary) unit of the 4.4L V8 diesel twin-turbo system. Driven by exhaust gas, it compresses the intake air to raise...

Air Suspension Connector joins the valve block to a high-pressure air line within the air suspension pneumatic circuit. The fitting forms a sealed...

Air Spring - rear right-hand air spring for the electronic air suspension system. The air spring is the load-bearing element at the rear axle, tak...

Transfer Box Drive Chain for the transfer case. It transmits drive from the transfer case input to the output, distributing torque to the front and...

Shock Absorber for the rear axle, part of the rear springs and shock absorber assembly within the air suspension system. The damper controls compr...

Shock Absorber - rear shock absorber for vehicles equipped with ACE (Active Cornering Enhancement) and continuous variable damping. The damper con...

This OEM NTN Wheel Bearing Kit offers unmatched durability and performance for Land Rover vehicles. Featuring premium bearings, a locking nut, and ...

Brake Pad Wear Sensor - Front The electronic brake pad wear sensor for the front axle, part of the braking system's pad-wear warning circuit. It lo...

Rear Shock Absorber for the rear suspension, damping wheel and body movement over the axle. Fitted to vehicles with Continuous Variable Damping, wh...

Rear Shock Absorber for models with air suspension but without adaptive (electronically controlled) damping. The damper controls rear axle movemen...

Vacuum Pump for the 2.0L 16-valve petrol (Ingenium / GTDI) engine. The pump supplies the vacuum used by the brake booster (servo) and other vacuum...

Brake Caliper for the front left-hand position, supplied without brake pads. The caliper houses the hydraulic pistons that clamp the brake pads ag...

Brake Calliper for the front axle, right-hand side, part of the front disc brake assembly. The calliper houses the hydraulic pistons and clamps th...

Brake Master Cylinder for the hydraulic braking circuit. Mounted to the brake booster (servo), the master cylinder converts brake-pedal force into...

Anti-Roll Bar Bush - mounts the front anti-roll (stabilizer) bar to the chassis on vehicles with ACE active roll control. This insulator bush loca...

Anti-Roll Bar Bush - mounts the rear anti-roll (stabilizer) bar to the chassis on vehicles with ACE active roll control. This insulator bush locat...

Anti-Roll Bar Bush - mounts the rear anti-roll (stabilizer) bar to the chassis on vehicles with ACE active roll control. This insulator bush locat...

Drain Plug Sealing Washer seals the M18 oil drain and filler plug on the transfer case. The washer deforms as the plug is tightened to form a leak...

Transfer Box Oil is the lubricant specified for the single-speed transfer case. It lubricates the transfer case internals and is used when carryin...