Allmakes4x4 Parts

Air Suspension Connector joins the valve block to a high-pressure air line within the air suspension pneumatic circuit. The fitting forms a sealed...

Air Suspension Compressor Cover - Upper is the upper half of the protective housing that encloses the air suspension compressor. It shields the co...

Air Suspension Compressor Cover - Lower is the lower half of the protective housing that encloses the air suspension compressor. It shields the co...

Fuel Sender Flange for the fuel tank pump, sender and filler assembly. This flange seats over the fuel level sender and pump aperture on top of the...

Fuel Pump Module is the in-tank electric fuel pump and level sender assembly that delivers pressurised fuel to the engine. Fitted to petrol applic...

Fuel Sender Float mounts on the fuel level sender arm inside the rear fuel tank. The float rides on the fuel surface and moves the sender arm to s...

Fuel Sender Float mounts on the fuel level sender arm inside the rear fuel tank. The float rides on the fuel surface and moves the sender arm to s...

Lower Inlet Manifold Gasket for the supercharged 3.0L V6 petrol engine. It seals the lower section of the inlet manifold to the cylinder head, seal...

Oil Filter and Cooler is a combined assembly within the engine lubrication circuit, integrating the oil filter housing with the engine oil cooler. ...

Rear Towing Hook that fits the rear tow hitch receiver, providing a rated attachment point for towing and recovery at the rear of the vehicle. Sup...

Exhaust Crossover Pipe carries exhaust gas between the two cylinder banks of the 3.0 V6 diesel engine, routing the outlet of one manifold across th...

EGR Outlet Gasket seals the outlet joint of the exhaust gas recirculation (EGR) assembly. Fitted to the 3.0L V6 diesel (TDV6) engine, it forms a g...

Drive Belt Tensioner maintains correct tension on the auxiliary drive belt within the front-end accessory drive. The spring-loaded arm and integra...

Parking Aid Sensor is an ultrasonic Park Distance Control (PDC) sensor mounted in the bumper. It emits and receives ultrasonic pulses to measure t...

Crankshaft Rear Seal and Retainer - the rear main oil seal and its housing, part of the cylinder block and plugs assembly at the rear of the cranks...

Crankshaft Timing Trigger Wheel for V6 and V8 diesel engines. The toothed reluctor wheel mounts on the crankshaft and passes the crankshaft positi...

Secondary Drive Belt Idler guides and maintains tension on the secondary (supercharger) drive belt within the front-end accessory drive. The idler...

Fan Bracket for the 5.0L V8 petrol engine (AJ133), supplied complete with idler pulley. The bracket mounts to the front of the engine and carries ...

Ignition Coil for V6 and V8 petrol engines, mounted directly on the spark plug in a coil-on-plug arrangement. The coil steps up the battery supply...

Idler Pulley for the secondary drive belt circuit on supercharged petrol engines. The idler is a freely-rotating, sealed-bearing pulley that guide...

Drive Belt Tensioner - maintains correct tension on the front accessory (auxiliary) drive belt. The sprung tensioner assembly applies constant loa...

Thermostat and Housing for the engine cooling circuit, supplied as the thermostat pre-assembled in its housing. Regulates coolant flow to bring th...

Mirror Housing Cover for the left-hand exterior door mirror, the outer cap that fits over the mirror housing. Supplied primed and requires paintin...

Cover - Mirror Housing

O-Ring for the variable valve timing (VVT) solenoid. Seals the VVT solenoid where it locates into the cylinder head, retaining oil pressure to the...

Starter Motor for the engine starting system, mounted at the engine-to-transmission bellhousing. When cranking, the integral solenoid drives the p...

Water Outlet Tube carries coolant between the water pump and the thermostat housing within the engine cooling circuit. For 3.0L supercharged V6 an...

Fuel Injector Sealing Washer - seals the fuel injector where it seats in the cylinder head. Fitted at the base of the injector, it forms the combu...

Fuel Injector Pipe Clamp for the high-pressure fuel injection system of the 3.0L V6 and 4.4L V8 (SDV8) diesel engines. The clamp secures a high-pr...

Thermostat Housing for the 5.0-litre AJ133 V8 petrol engine, part of the engine cooling circuit. The housing seats the coolant thermostat and form...

Injection Pump Leak-Off Tube for the 3.0L V6 diesel engine. It carries leak-off (return) fuel from the high-pressure injection pump back to the fu...

Injection Pump Leak-Off Tube for the 3.0L V6 diesel engine. It carries leak-off (return) fuel from the high-pressure injection pump back to the fu...

Spark Plug for the ignition system of the 5.0L V8 petrol engine (AJ133), in supercharged and naturally aspirated forms. Installed in the cylinder ...

O-Ring for the air-conditioning refrigerant circuit. Seals a connection in the refrigerant lines, preventing refrigerant leakage at the joint. Rep...

Heater Resistor Control Unit - regulates the speed of the heater blower motor within the HVAC (heating and ventilation) system. It modulates the c...

Drive Belt - 2.2 TD4 - Without A/C

Sealing Ring seals the joint between the engine oil cooler and the water pump on the AJ133 5.0L V8 and 3.0L supercharged V6 petrol engines. It mai...

Front Suspension Arm, left-hand side, for vehicles equipped with Roll Stability Control (RSC). Connects the wheel knuckle to the front subframe as...

Front Lower Suspension Arm, right-hand side, for vehicles equipped with Roll Stability Control (RSC). Part of the independent front suspension ass...

Front Lower Suspension Arm Kit, right-hand side. Part of the independent front suspension assembly, the lower arm connects the wheel knuckle to th...

Oil Cooler Tube carries engine oil through the oil cooler circuit. The tube connects the engine oil system to the oil cooler, routing oil to be co...

Cylinder Head Bolt secures the cylinder head to the engine block on V6 and V8 petrol engines. Threaded M11 x 178 mm. Twenty bolts are required per...

Parking Sensor is a Park Distance Control (PDC) ultrasonic sensor mounted in the bumper, part of the parking aid system. It emits and receives ult...

Hub Nut - M24 x 2.0 for wheel hub and bearing retention. This M24 x 2.0 metric hub nut secures the wheel hub or halfshaft flange onto the stub axl...

Ride Height Sensor for the rear of the electronic air suspension system. It measures the position of the rear suspension arm relative to the body a...