for Discounts / VAT
for Discounts & Correct VAT
Allmakes4x4 is one of the most recognised suppliers of aftermarket Land Rover parts, providing reliable replacement components for vehicles such as the Land Rover Defender, Discovery, Range Rover and Freelander. Known for producing dependable service and repair parts including brake discs, filters, clutch components and suspension parts, Allmakes4x4 products are widely used by workshops and Land Rover specialists for routine maintenance and vehicle repairs.
Explore all Land Rover parts brands we supply.
4-Pin Relay is a multi-purpose electromechanical switching relay used throughout the vehicle's electrical system, where a low-current control signa...
View full detailsFuse - 60A - high-current blade fuse for the main electrical protection circuits. Rated at 60 amps, this fuse protects high-draw circuits such as ...
View full details40A Maxi Fuse is a circuit-protection device within the vehicle electrical system. The Maxi high-current blade format, rated at 40 amps and colour...
View full detailsHeight Sensor Jumper Lead for the electronic air suspension system. This connecting lead links a ride-height sensor to the chassis wiring harness,...
View full detailsNavigation Computer for the factory satellite navigation system, supplied less screen. This is the processing module of the navigation system. It ...
View full detailsHalogen Bulb, H8 - 12V 35W single-filament halogen capsule for the exterior lighting system. The H8 uses the PGJ19-1 base and is the 35W member of...
View full detailsFront Fog Lamp Bulb - H11 halogen capsule rated 12V 55W, operating in the exterior lighting system. The H11 uses the standardised PGJ19-2 base, wh...
View full detailsFront Fog Lamp - Right-Hand for the front bumper lighting assembly. This lamp mounts in the front bumper fog lamp aperture and provides supplement...
View full detailsFront Side & Flasher Lamp - combined side light and front direction indicator unit, part of the front exterior lighting assembly. Houses both ...
View full detailsFront Side and Flasher Lamp, Right-Hand Side. Lamp unit forming part of the front exterior lighting assembly at the right-hand side of the vehicle....
View full detailsExhaust System Screw, M8 x 20 mm. Used on exhaust and turbocharger joints - securing the catalytic converter to its mating pipe section, and at tu...
View full detailsFlanged Nut, M8. The integral flange spreads clamp load across the joint face and removes the need for a separate washer. Used in the exhaust syst...
View full detailsFuel Vapour Valve for the evaporative emission control (EVAP) system. The valve governs the flow of fuel vapour between the fuel tank and the char...
View full detailsFuel Sender and Filter forms part of the in-tank fuel delivery assembly, mounted through the fuel tank access aperture. The assembly combines the ...
View full detailsFuel Sender and Filter forms part of the in-tank fuel delivery assembly, mounted through the fuel tank access aperture. The assembly combines the ...
View full detailsExhaust Gasket for the catalytic converter joint in the exhaust system of the V8 turbo diesel (TdV8). The gasket is clamped between the mating exh...
View full detailsPlain Washer - metric M10 flat washer for use in general fastening assemblies throughout the vehicle. A standard flat washer used to distribute lo...
View full detailsFront Mudflaps - moulded flaps mounted behind the front wheel arches to catch the spray, mud and stones thrown rearward by the front tyres. They r...
View full detailsRubber loadspace mat for the rear loadspace floor, part of the interior protection range. The mat covers the loadspace carpet with a waterproof, n...
View full detailsNeutral Sensing Switch - commonly referred to as the XYZ switch - on the ZF 5-speed automatic transmission, in the gear position sensing and starte...
View full detailsTransmission Sleeve for the ZF 6HP26 and 6HP28 six-speed automatic transmission. It is fitted within the main control valve body, where it forms th...
View full detailsGear Selector Linkage Bush in the floor gear-change assembly of the ZF 6HP26 / 6HP28 6-speed automatic transmission. The bush forms the pivot at t...
View full detailsRear Propshaft Bolt, securing the rear propshaft to the rear axle differential input flange within the rear driveline assembly. The bolt clamps th...
View full detailsSump Screw for the ZF 6HP26 and 6HP28 six-speed automatic transmission. It retains the transmission sump pan against the gearbox casing, clamping ...
View full detailsExternal Torx Head Bolt, M8 x 48 mm, for the front propshaft flange. The bolt clamps the front propshaft flange to its mating drive flange. Its ex...
View full detailsSpring Washer used in the floor-mounted gear change assembly of the ZF 6-speed automatic transmission. It is fitted under the fastener securing th...
View full detailsTransmission oil drain plug for the ZF 6HP six-speed automatic gearbox, sealing the drain aperture in the transmission fluid pan. The plug is remo...
View full detailsValve Body Gasket for the 5L40E five-speed automatic transmission main control assembly. It seals the joint between the valve body and the transmi...
View full detailsBrake Caliper Screw for the front brake caliper and parking brake installation. Retains the caliper or its carrier to the mounting face on the hub...
View full detailsScrew – M10 x 26 for the rear brake assembly. Secures rear brake components to their mounting face, with an M10 thread and 26 mm length. Brake fi...
View full detailsFlanged Bolt securing the front brake caliper in the front brake assembly. This bolt retains the caliper or its mounting bracket against the hub c...
View full detailsCaliper Kit
Caliper Bolt for the front brake caliper assembly. This bolt secures the brake caliper to the hub carrier. It is a critical fastener in the front ...
View full detailsBrake Caliper Piston for the front hydraulic disc brake assembly. The piston operates within the caliper bore and transmits hydraulic pressure fro...
View full detailsFront ABS wheel speed sensor, part of the anti-lock braking system's wheel speed sensing circuit. The sensor is mounted in the front hub carrier a...
View full detailsRear ABS wheel speed sensor, part of the anti-lock braking system's wheel speed sensing circuit. The sensor is mounted in the rear hub carrier and...
View full detailsABS Wheel Speed Sensor for the front hub, part of the anti-lock braking system. The sensor mounts at the front hub carrier and reads the rotating ...
View full detailsHandbrake Cable from the parking brake cable circuit - left-hand side. The cable transmits travel from the parking brake control to the expander me...
View full detailsHandbrake Cable from the parking brake cable circuit - right-hand side. The cable transmits travel from the parking brake control to the expander m...
View full detailsBrake Pad Wear Sensor - the rear-axle brake pad wear indicator. The sensor is routed to the rear brake pad and completes an electrical circuit tha...
View full detailsGrommet for the inspection aperture in the rear brake backplate. The backplate carries an access hole through which the parking brake shoe adjuster...
View full detailsRear Brake Caliper - Left-Hand is part of the rear braking assembly, mounting over the rear brake disc on the left-hand side of the vehicle. The c...
View full detailsBrake Caliper - Rear - RH is the right-hand rear caliper of the disc brake assembly. Under hydraulic pressure from the rear brake circuit, it clam...
View full detailsBrake Disc Splash Shield is the rear backing plate that mounts behind the brake disc at the rear hub. It shields the inboard face of the disc from...
View full detailsBrake Disc Splash Shield - RH Rear for the right-hand rear wheel station. This pressed steel panel mounts between the brake disc and the hub carri...
View full detailsService Kit - 5.0L V8 Petrol
Service Kit bundles the filters, spark plugs and sump hardware required for a scheduled service of the 4.4L AJ-V8 and 4.2L supercharged V8 petrol e...
View full detailsMajor Service Kit bundles the filters and sump hardware required for a scheduled major service of the 3.0L Td6 (BMW M57) diesel. It provides the e...
View full detailsAllmakes 4x4 parts are widely used by Land Rover workshops and independent mechanics as reliable aftermarket replacement components for routine servicing and repairs.
Allmakes 4x4 produces aftermarket replacement parts rather than original equipment components, but many of their products are designed to meet or exceed standard replacement specifications.
Allmakes 4x4 parts are compatible with many Land Rover vehicles including Defender, Discovery, Range Rover, Series and Freelander models.
Brake disc lifespan depends on driving conditions, but many Land Rover brake discs require replacement between 40,000 and 80,000 kilometres.