for Discounts / VAT
for Discounts & Correct VAT
Allmakes4x4 is one of the most recognised suppliers of aftermarket Land Rover parts, providing reliable replacement components for vehicles such as the Land Rover Defender, Discovery, Range Rover and Freelander. Known for producing dependable service and repair parts including brake discs, filters, clutch components and suspension parts, Allmakes4x4 products are widely used by workshops and Land Rover specialists for routine maintenance and vehicle repairs.
Explore all Land Rover parts brands we supply.
Rear Mud Flaps - moulded flaps fitted at the trailing edge of the rear wheel arches, at the lower body. Each flap hangs behind the rear tyre to in...
View full detailsMudflaps - Front
Front Mud Flaps - moulded flaps fitted at the trailing edge of the front wheel arches, at the lower body. Each flap hangs behind the front tyre to...
View full detailsService Kit - a single-part-number set of the filters and consumables required for a scheduled service on the 2.0L AJ200 single-turbo diesel engine...
View full detailsService Kit - a single-part-number set of the filters and consumables required for a scheduled service on the 2.0L AJ200 single-turbo diesel engine...
View full detailsService Kit - Major - OE Discovery 2 E1 F2 Petrol
screw M5 x 12
Nut and Washer Assembly is an M6 hexagonal nut supplied together with its washer as a single assembly. The washer spreads the clamping load across...
View full detailsWheel Bearing Circlip - 51 mm retaining ring for the wheel hub bearing. Seats in the groove of the knuckle bore and locates the hub bearing axiall...
View full detailsAccessory Drive Belt for the engine accessory (ancillary) drive on 2.0L GTDi and second-generation 2.0L turbocharged petrol engines. The belt is d...
View full detailsAccessory Drive Belt for the engine accessory (ancillary) drive on 2.0L GTDi and second-generation 2.0L turbocharged petrol engines. The belt is d...
View full detailsPCV Valve Service Kit for the crankcase ventilation circuit of the 2.0L Ingenium petrol engine (AJ200 / AJ20P4). The positive crankcase ventilatio...
View full detailsOxygen Sensor - exhaust and emission control system, 2.0L engine. The sensor threads into the exhaust front pipe at the catalytic converter, in th...
View full detailsRear Crankshaft Oil Seal and Retainer forms the oil-tight closure at the flywheel end of the cylinder block, within the Cylinder Block and Cranksha...
View full detailsScrew - threaded fastener used in body and chassis assembly.
Wiper Blades - Front Pair - LHD is a replacement windscreen wiper blade set for left-hand drive vehicles, supplied as a matched front pair. The bla...
View full detailsFront Windscreen Wiper Blade Kit for the front wash/wipe system, supplied as a matched two-piece set for right-hand-drive vehicles. The kit contai...
View full detailsMagnetic Oil Drain Plug - M14 x 21 sump drain plug in the engine lubrication system. The plug seals the drain aperture in the oil sump and is remo...
View full detailsRocker Arm and Tappet Assembly, 2.2L DW12 Diesel (Td4)
Front Brake Hose - the flexible section of the front brake circuit, running between the rigid brake pipe on the body and the front brake caliper. T...
View full detailsFront Brake Hose - the flexible section of the front brake circuit, running between the rigid brake pipe on the body and the front brake caliper. U...
View full detailsVacuum Pump Sealing Ring - seals the joint between the vacuum pump and its mounting face on the engine, within the combined oil pump and vacuum pum...
View full detailsFront Lower Suspension Arm, left-hand side, supplied as a complete arm with its mounting bushes and integral lower ball joint. The arm links the f...
View full detailsSuspension arm bush for the rear position of the front lower suspension arm (wishbone), in the front strut suspension assembly. The bush presses i...
View full detailsFront lower suspension arm (wishbone), right-hand side, from the front strut suspension assembly. The arm locates the base of the wheel knuckle ag...
View full detailsExhaust Manifold Fixing Spacer - a fixing component within the exhaust manifold mounting arrangement of the 2.2L CR DI 16V four-cylinder diesel eng...
View full detailsTransmission Sleeve Kit
Output Shaft Oil Seal from the external components of the ZF 9HP48 / 9HP50 nine-speed automatic transmission. The seal fits around the gearbox out...
View full detailsHub Bearing
Front Brake Pad Wear Sensor Wire from the front brake pad wear warning circuit. The sensor wire is routed into a slot in the front brake pad frict...
View full detailsNOx Trap Temperature Sensor from the exhaust aftertreatment system of the 2.0L I4 AJ200 Ingenium diesel engine. The sensor reports exhaust gas tem...
View full detailsInlet valve stem seal for the cylinder head valve train. The seal is pressed onto the inlet valve guide boss and wipes the valve stem as it recipr...
View full detailsValve Stem Seal, Exhaust - cylinder head valve train of the 2.0L 16-valve TiVCT turbocharged petrol engine. Fits over the exhaust valve stem at th...
View full detailsEngine Oil Pan - the sump casing that closes the bottom of the cylinder block on the 2.2L 16V common-rail diesel (DW12) and forms the engine's oil ...
View full detailsBrake Caliper is the rear brake caliper within the rear disc brake assembly. It houses the hydraulic piston and carries the brake pads; under brak...
View full detailsBrake Caliper is the rear brake caliper within the rear disc brake assembly. It houses the hydraulic piston and carries the brake pads; under brak...
View full detailsAir Conditioning Compressor - Kit
Pump - Oil Vacuum
Tailgate Strut - gas-pressurised support strut for the luggage compartment door (tailgate). The strut counterbalances the weight of the tailgate, ...
View full detailsBanjo Bolt for the turbocharger on the 2.0L 16V Si4 TIVCT petrol engine. A banjo bolt is a hollow union bolt that fastens a fluid line to the turb...
View full detailsHex Head Bolt and Washer - fastener with captive washer for the rear knuckle and suspension arm mountings. Secures the rear suspension arm to the ...
View full detailsCover Gasket - seals a cover within the crankcase ventilation and emission control system. Fitted to the 2.0L four-cylinder AJ200/AJ20 petrol engi...
View full detailsCylinder Head Bolt securing the cylinder head to the cylinder block on the 2.0L 16V Ti-VCT turbocharged petrol engine. The bolt clamps the head, h...
View full detailsSealing Ring - 34.2 x 3.0mm O-ring that seals a joint in the thermostat housing and EGR cooling circuit. Fitted to the 2.0L four-cylinder AJ200/AJ...
View full detailsOil Filter filters the engine oil on the 2.0L 16V turbocharged petrol engine. Part of the oil cooler and filter assembly, it removes contaminants ...
View full detailsAuxiliary Coolant Pump - an electrically driven pump in the engine cooling system that circulates coolant independently of the belt-driven main wat...
View full detailsTiming Chain Tensioner for the 2.0L 16V TIVCT turbocharged petrol engine, operating within the timing drive assembly at the front of the engine. I...
View full detailsWater Pump - Fuel-Fired Heater for the auxiliary fuel-fired heater coolant circuit on 2.0L AJ200 petrol applications. This electrically driven circ...
View full detailsAllmakes 4x4 parts are widely used by Land Rover workshops and independent mechanics as reliable aftermarket replacement components for routine servicing and repairs.
Allmakes 4x4 produces aftermarket replacement parts rather than original equipment components, but many of their products are designed to meet or exceed standard replacement specifications.
Allmakes 4x4 parts are compatible with many Land Rover vehicles including Defender, Discovery, Range Rover, Series and Freelander models.
Brake disc lifespan depends on driving conditions, but many Land Rover brake discs require replacement between 40,000 and 80,000 kilometres.