Allmakes4x4 Parts

Camshaft Spacer for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It locates in the camshaft sprocket and timing gear area. ...

Inlet Valve for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It seats in the cylinder head as part of the valve train. The ...

Fuel Pump Cover Gasket for the engine-mounted high-pressure fuel pump on the 2.0L turbocharged direct-injection petrol engine. Seals the joint bet...

Valve Stem Seal Set for the 2.0L 16V petrol engine, supplied as a set of eight seals. Valve stem seals fit at the top of the valve guides in the c...

Engine Coolant Temperature Sensor for the 2.0L 16V petrol engine. It threads into the thermostat housing and measures coolant temperature, signalli...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Oil Filter Adaptor Gasket for the 2.0L 16-valve turbocharged petrol engine, sealing the oil cooler and filter adaptor to the engine. The gasket fo...

Engine Knock Sensor for the 2.0L 16-valve turbocharged petrol engine, mounted on the cylinder block as part of the engine management system. The s...

Variable Valve Timing Solenoid - Inlet for the 2.0L 16V TiVCT turbocharged petrol engine, controlling oil flow to the intake camshaft phaser. The ...

Inlet Manifold Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the inlet manifold and the cylinder head. It ma...

Throttle Body Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the throttle body and the inlet manifold. It mai...

Cylinder Head Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the cylinder head and the engine block. It conta...

Throttle Body Assembly for the 2.0L Si4 240PS turbocharged petrol engine, mounted in the air intake tract between the intake ducting and the inlet ...

Engine Mounting is the insulator that supports the engine on its mounting and isolates vibration from the body. It locates the engine to the subfr...

Engine Mounting is the insulator that supports the engine on its mounting and isolates vibration from the body. It locates the engine to the subfr...

Fuel Hose forms the fuel filter section of the fuel delivery circuit. It routes fuel through the filter housing, connecting the filter into the su...

Tank - Radiator Overflow

Hose - Radiator

Bolt is a threaded fastener used across several assemblies, including door latch mechanisms, front seat bases and anti-lock braking system mounting...

Bolt for the front suspension, used at the suspension arm, front cross member and stabilizer bar fixings. M14 x 85mm.

Bolt securing the front suspension lower control arm at its rear fixing point. M14 x 90mm, Torx drive head.

Camshaft Cover for the 3.2L inline six petrol engine. It seals the top of the cylinder head and encloses the camshafts and valve gear, mating to t...

Rear Suspension Arm Washer is used at the rear knuckle and suspension arm mountings. It sits under the arm fixing bolt, spreading the clamp load a...

Control

Shaft - Main

Turbocharger Oil Drain Gasket sealing the oil drain (return) connection at the base of the turbocharger. Seals the joint where the turbocharger oi...

Oil Pump for the 2.2L DW12 diesel engine, part of the engine lubrication system. Driven from the crankshaft, it draws oil from the sump and delive...

Camshaft Cover for the 2.2L DW12 diesel engine, sealing the top of the cylinder head over the camshafts and valvetrain. Also referred to as the ro...

Front End Panel forming the front-end body structure, commonly known as the front slam panel. It supports the cooling pack and front body fixtures...

Rear Lamp Assembly for the left-hand side, housing the stop (brake) and flasher (direction indicator) lamps in a single rear light cluster. The un...

Rear Lamp Assembly for the right-hand side, housing the stop (brake) and flasher (direction indicator) lamps in a single rear light cluster. The u...

Engine Mounting (mounting insulator / support bracket) for the 2.2L diesel engine, part of the powertrain mounting system. It combines a bonded rub...

Engine Mounting (support bracket / insulator) for the 3.2L Si6 petrol inline-six engine, part of the powertrain mounting system. It carries engine ...

Sensor Assembly

Sensor Assembly

Inlet Manifold distributes charge air from the intake system to the cylinder head inlet ports. Fitted to the 2.2L Td4 (DW12) diesel engine, it rou...

Rear Coil Spring is a road spring for the rear suspension. It supports rear ride height and absorbs road inputs, seating between the lower suspens...

Mass Air Flow (MAF) Sensor mounted in the air intake tract, downstream of the air cleaner. It measures the mass of air drawn into the engine and s...

Flywheel Bolt secures the flywheel to the crankshaft on the 2.2 litre Td4 diesel engine. Hex-head design.

Brake Disc Retaining Screw that locates the brake disc against the wheel hub flange, holding the disc square and in position while the caliper and ...

Flywheel Bolt for the 2.2L DW12 common-rail turbo diesel engine, securing the flywheel to the rear flange of the crankshaft. Hexagonal head, M8 x ...

Cylinder Head Gasket seals the joint between the cylinder head and the cylinder block on the 2.2L 16V common-rail diesel engine (DW12), containing ...

Brake Caliper Guide Pin Dust Cover for the front and rear brake calipers. The boot fits over the caliper guide pin and seals against the carrier b...

Parking Sensor for the park distance control (PDC) system, used in both front and rear bumper positions. The sensor mounts into its aperture in th...

Front Brake Caliper for the left-hand side, part of the front disc brake assembly. The caliper mounts over the front brake disc and houses the hyd...

Brake Caliper for the right-hand front, part of the front disc brake assembly. It mounts over the brake disc and houses the hydraulic pistons and ...