Allmakes4x4 Parts

Variable Valve Timing Solenoid - Inlet for the 2.0L 16V TiVCT turbocharged petrol engine, controlling oil flow to the intake camshaft phaser. The ...

Inlet Manifold Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the inlet manifold and the cylinder head. It ma...

Throttle Body Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the throttle body and the inlet manifold. It mai...

Cylinder Head Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the cylinder head and the engine block. It conta...

Throttle Body Assembly for the 2.0L Si4 240PS turbocharged petrol engine, mounted in the air intake tract between the intake ducting and the inlet ...

Engine Mounting Bolt with hexagonal head, M12 x 112 mm. A structural fastener securing the engine mounting to the subframe; the same bolt is also ...

Engine Mounting is the insulator that supports the engine on its mounting and isolates vibration from the body. It locates the engine to the subfr...

Engine Mounting is the insulator that supports the engine on its mounting and isolates vibration from the body. It locates the engine to the subfr...

Fuel Hose forms the fuel filter section of the fuel delivery circuit. It routes fuel through the filter housing, connecting the filter into the su...

Turbocharger Hose connects the turbocharger outlet to the intercooler inlet within the charge-air system. It carries pressurised, heated charge ai...

Upper Knuckle Bolt is a hex-head bolt that retains the upper knuckle joint within the hub and knuckle assembly. It clamps the upper knuckle to the...

Shock Absorber Top Mount for the front strut assembly. The top mount secures the upper end of the front strut to the vehicle body, isolating suspe...

Bump Stop for the front suspension. Mounted on the damper, the bump stop cushions the end of suspension travel, absorbing the impact as the wheel ...

Parking Sensor is a Park Distance Control (PDC) ultrasonic sensor mounted in the bumper, part of the parking aid system. It emits and receives ult...

Sensor Assembly

Sensor Assembly

Bolt is a threaded fastener used across several assemblies, including door latch mechanisms, front seat bases and anti-lock braking system mounting...

Hub Nut - M24 x 2.0 for wheel hub and bearing retention. This M24 x 2.0 metric hub nut secures the wheel hub or halfshaft flange onto the stub axl...

Bolt for the front suspension, used at the suspension arm, front cross member and stabilizer bar fixings. M14 x 85mm.

Bolt securing the front suspension lower control arm at its rear fixing point. M14 x 90mm, Torx drive head.

Turbocharger Oil Drain Gasket sealing the oil drain (return) connection at the base of the turbocharger. Seals the joint where the turbocharger oi...

Oil Pump for the 2.2L DW12 diesel engine, part of the engine lubrication system. Driven from the crankshaft, it draws oil from the sump and delive...

Camshaft Cover for the 2.2L DW12 diesel engine, sealing the top of the cylinder head over the camshafts and valvetrain. Also referred to as the ro...

Sensor Assembly

Sensor Assembly

Inlet Manifold distributes charge air from the intake system to the cylinder head inlet ports. Fitted to the 2.2L Td4 (DW12) diesel engine, it rou...

Mass Air Flow (MAF) Sensor mounted in the air intake tract, downstream of the air cleaner. It measures the mass of air drawn into the engine and s...

Heater Hose

Flywheel Bolt secures the flywheel to the crankshaft on the 2.2 litre Td4 diesel engine. Hex-head design.

Brake Disc Retaining Screw that locates the brake disc against the wheel hub flange, holding the disc square and in position while the caliper and ...

Flywheel Bolt for the 2.2L DW12 common-rail turbo diesel engine, securing the flywheel to the rear flange of the crankshaft. Hexagonal head, M8 x ...

Cylinder Head Gasket seals the joint between the cylinder head and the cylinder block on the 2.2L 16V common-rail diesel engine (DW12), containing ...

Brake Caliper Guide Pin Dust Cover for the front and rear brake calipers. The boot fits over the caliper guide pin and seals against the carrier b...

Windscreen Washer Pump - the combined motor and pump unit mounted in the washer reservoir, part of the Windscreen Wash and Wipe system. When the w...

Interior Trim Retainer Clip - a moulded fastener used to secure interior trim to the vehicle body. The clip retains door casings, pillar trims and...

Head Gasket - 3.0 TDV6 - Grade 3

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

Gasket round shape type, cover

Oil Cooler and Filter Assembly combines the engine oil cooler and oil filter housing for the 2.2L TD4 diesel engine (DW12). Mounted in the lubrica...

Oil Cooler and Filter Assembly combines the engine oil cooler and oil filter housing for the 2.2L TD4 diesel engine (DW12). Mounted in the lubrica...

Inlet Manifold Gasket Kit - gasket set for the inlet (intake) manifold of the 2.2L TD4 diesel engine. Renews the sealing between the inlet manifol...

Cylinder Block Plug, 16mm, seals a threaded port in the cylinder block. It closes an internal casting passage in the block, retaining pressure and...

Sump Drain Plug for the 2.2L DW12 Td4 diesel engine oil pan. Threaded into the base of the sump, it is removed to drain the engine oil during a se...

Timing Belt for the 2.2L DW12 Td4 diesel engine - the toothed belt that drives the camshafts from the crankshaft, keeping valve and piston movement...

Rocker Arm for the 2.2L DW12 Td4 diesel engine, part of the cylinder head valve train. It transfers camshaft lobe motion to the valve, opening it ...

Thermostat Housing Gasket for the engine cooling system. It seals the joint between the thermostat housing and the engine, containing coolant and ...

Blade Fuse rated at 10 A, colour-coded red to match its rating. This standard automotive blade fuse plugs into the vehicle fuse box and protects it...