Allmakes4x4 Parts

Bulb Holder - double-pole bulb holder for the rear stop and tail lamp. It carries the twin-filament stop/tail bulb and locates by bayonet fitting ...

Stop Lamp Cover for the high-level (high-mounted) centre stop lamp. This cover forms the outer lens of the high-mounted stop lamp assembly at the ...

Rear Lamp Seal - left-hand foam gasket sealing the rear lamp assembly against the body panel. It sits between the lamp housing flange and the body...

Rear Reflector mounts in the rear lamp area as part of the rear lighting and signalling assembly. A passive retroreflector that returns incident l...

Number Plate Lamp - LED is the rear licence plate illumination unit within the rear lighting circuit. It sits in the rear number plate surround an...

Number Plate Lamp - Chrome is the rear licence plate illumination unit within the rear lighting circuit. It mounts above the licence plate at the ...

Number Plate Lamp for the rear number plate lighting circuit. This complete lamp assembly mounts at the rear of the vehicle to illuminate the numb...

Number Plate Lamp - LED is the rear licence plate illumination unit within the rear lighting circuit. The lamp is housed in the rear door handle a...

Rear Stop and Flasher Lamp for installation in the left-hand position of the rear bumper. This unit provides the stop lamp and direction indicator...

Bumper Lamp rear left-hand assembly, part of the rear bumper lighting cluster. The unit combines the reverse lamp and rear fog lamp in a single ho...

Rear Bumper Lamp from the rear lighting assembly - the right-hand (RH) unit mounted in the rear bumper. The combined lamp carries the reversing li...

Rear Bumper Lamp - Left-Hand - the near-side rear lamp unit that mounts within the rear bumper, below the main tail lamp cluster, as part of the ve...

Bulb Holder - double-filament bulb holder for an exterior lamp assembly, accepting a 5/21W (P21/5W) twin-filament bulb. The holder seats into the ...

Front Fog Lamp - Right-Hand for the front bumper lighting assembly. This lamp mounts in the front bumper fog lamp aperture and provides supplement...

Front Left-Hand Indicator Lamp Assembly for the pre-facelift Discovery 2 (1999-2002). This amber turn signal lamp unit is mounted at the front lef...

Front Left-Hand Indicator Lamp Assembly for the Discovery 1. This amber turn signal lamp unit is mounted at the front left corner of the vehicle a...

Front Side & Flasher Lamp - combined side light and front direction indicator unit, part of the front exterior lighting assembly. Houses both ...

Front Side and Flasher Lamp, Right-Hand Side. Lamp unit forming part of the front exterior lighting assembly at the right-hand side of the vehicle....

Kit gasket carb for Rover V8 engines fitted with SU carburetors

Exhaust System Screw, M8 x 20 mm. Used on exhaust and turbocharger joints - securing the catalytic converter to its mating pipe section, and at tu...

Flanged Nut, M8. The integral flange spreads clamp load across the joint face and removes the need for a separate washer. Used in the exhaust syst...

Exhaust System Bolt, M8 x 45 mm. Used at the catalytic converter flange joint, clamping the converter to its mating exhaust pipe section. Fastene...

Fuel Vapour Valve for the evaporative emission control (EVAP) system. The valve governs the flow of fuel vapour between the fuel tank and the char...

Pump - Fuel Tank

Spring Washer is a split spring lock washer fitted under a nut or bolt head to maintain clamping tension and resist loosening caused by vibration. ...

Spring Washer, 1/4" nominal size. A split helical washer fitted under a nut or bolt head as a fastening hardware component. The sprung split appli...

Fuel Filler Grommet seals the joint between the fuel tank filler neck and the body aperture, within the fuel filler assembly. The rubber grommet l...

Filler pipe hose 90

Fuel Filler Hose connecting the external fuel filler neck to the fuel tank on the Defender. This rubber hose forms the sealed connection between t...

Fuel Filler Cap for the fuel tank filler neck, part of the fuel storage and filler assembly. Threads onto the filler neck to seal the fuel tank af...

Fuel Filler Cap - sealing cap for the fuel tank filler neck. Locates in the filler neck and seals against it, closing the tank and keeping water a...

Spring Washer - single-coil spring lock washer, 12 mm. Fitted between the nut or bolt head and the mating face on M12 fastenings, including engine...

Spring Washer - M10 single-coil spring lock washer. Fitted beneath a nut or bolt head, the split single-coil section bears against the fastener to...

Spring Washer for use as a locking fastener component across Land Rover assemblies. A helical split spring washer providing resistance against fas...

Fuel Filter Water Sensor for the TD5 fuel filter assembly, fitted to the Discovery 2 TD5. This sensor is installed in the base of the fuel filter ...

Water-in-Fuel Sensor for the Td5 2.5L 5-cylinder turbo diesel fuel filter / sedimentor assembly. It threads into the base of the fuel filter housi...

Cup Washer for securing the instrument panel to the engine cowl on the Defender 90 and 110. This pressed steel cup-type washer fits beneath the in...

Fuel Filter Shield - rear shield section of the chassis-mounted fuel filter housing on TDCi diesel engines. The filter housing sits low on the cha...

Fuel Pipe - Pump to Engine for the Td5 diesel fuel delivery system. This under-body pipe assembly carries fuel from the in-tank pump forward to th...

Fuel Pipe Assembly forming the vent lines of the Td5 2.5L 5-cylinder turbo diesel fuel system. The vent pipework carries fuel vapour away from the...

Fuel Pipe forms part of the low-pressure fuel supply circuit, carrying diesel from the fuel pump to the fuel filter. Fitted to the Td5 2.5L 5-cyli...

Fuel Pipe from the Td5 2.5L 5-cylinder turbo diesel fuel system, running on the low-pressure side between the inline fuel filter and the pump. It ...

Fuel Pipe - twin-line pump-to-engine section of the fuel delivery circuit on the 2.5L Td5 five-cylinder turbo diesel. The two lines are routed tog...

Fuel Pipe - Filter to Injection Pump for the Defender 300TDi 2.5L diesel (non-EGR). This pipe carries filtered diesel from the fuel filter housing...

Fuel Filter Holder - With Filter for the Defender Puma diesel fuel system. This complete filter assembly mounts in the engine bay fuel circuit and...

Fuel Filter Assembly for the Td5 2.5L 5-cylinder turbo diesel fuel system. It filters the diesel supply between the tank and the injection system,...

Fuel Filter is the cartridge-type filter in the diesel fuel supply circuit, mounted between the tank and the injection pump. It removes particulat...

Fuel Filter & Sedimentor Assembly - Td5