Land Rover Freelander Parts

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

Wheel Nut for steel road wheels on the Freelander 1. Standard fastener securing the steel road wheel to the hub. Sold individually.

Repeater Side Clear LED Pair

Exhaust Mounting - Rubber is a rubber isolator in the exhaust suspension system, fitted between the exhaust assembly and the vehicle underbody. Th...

Engine Plug is a core (welch) plug that seals the casting holes in the engine. Fitted to the cylinder block, cylinder head water jacket and inlet ...

Mirror Glass - LH is the replacement convex glass for the left-hand exterior door mirror. The convex profile gives a wider rearward field of view....

Rear Bumper-Mounted Lamp Assembly, right-hand side - the lower rear lamp set into the rear bumper. It carries the stop and direction-indicator (fl...

Rear Bumper Lamp, Right-Hand Side. Lamp unit installed in the right-hand side of the rear bumper, forming part of the rear exterior lighting assemb...

Hose EGR Exhaust Tube

Front Propshaft - the propeller shaft that forms part of the four-wheel-drive driveline, connecting the Intermediate Reduction Drive (IRD) unit out...

Clutch Master Cylinder - hydraulic master cylinder in the clutch actuation circuit, for TD4 diesel applications with left-hand drive. Mounted on t...

Suspension Link Bush - Bottom - Rear is a pivot bush for the bottom link of the rear suspension. It is pressed into the link at its mounting eye, ...

Trailing Link Bush - a rubber-to-metal bush that forms the compliant pivot mounting for the rear trailing link in the independent rear suspension. ...

Anti Roll Bar Bush locates the anti-roll bar in its chassis mounting bracket, providing a resilient rubber interface between the bar and the subfra...

Radiator tank assembly (Use Cap PCD000090/PCD500030)

Pipe Clamp for the engine oil cooler pipe circuit. This clamp plate secures the oil cooler pipes in the engine bay, restraining them against vibra...

Crankshaft Thrust Bearing

Crankshaft Main Thrust Bearing

EGR Pipe Gasket - sealing gasket for the joint between the exhaust gas recirculation pipe and the inlet manifold on the 2.0L L Series diesel engine...

Parking Aid Sensor for the front bumper inner position, forming part of the Parking Distance Control (PDC) system. The sensor emits ultrasonic pul...

Front Fog Lamp Bulb - H11 halogen capsule rated 12V 55W, operating in the exterior lighting system. The H11 uses the standardised PGJ19-2 base, wh...

Collapsible pinion spacer for the differential crownwheel and pinion assembly, fitted on the pinion shaft between the two pinion head bearings. Th...

Bulb Holder - double-pole bulb holder for the rear stop and tail lamp. It carries the twin-filament stop/tail bulb and locates by bayonet fitting ...

Number Plate Lamp - LED is the rear licence plate illumination unit within the rear lighting circuit. The lamp is housed in the rear door handle a...

Fuel Filter is the cartridge-type filter in the diesel fuel supply circuit, mounted between the tank and the injection pump. It removes particulat...

Fuel Filter - in-tank filter mounted on the fuel pump and sender assembly, part of the fuel tank pump, sender and mountings group. The filter scre...

Exhaust Tailpipe Assembly - the rear section of the exhaust system, for the 2.0L four-cylinder turbo diesel (TCIE). The pipe carries exhaust gas f...

Clutch Master Cylinder for the hydraulic clutch actuation circuit on 1.8 4-cylinder petrol engines with manual transmission, right-hand drive. Mou...

Handbrake Cable - right-hand side cable in the parking brake linkage. The cable runs from the handbrake lever compensator to the actuating lever a...

Brake Backplate Blanking Plug - oval closure for the access aperture in the rear drum brake backplate. The backplate is pierced so that the shoe a...

Rear Brake Shoe Return Spring for the rear drum brake assembly. The spring works between the brake shoes, pulling them back onto their stops and o...

Air Intake Duct Hose for the Td4 2.0L M47 four-cylinder 16-valve turbo diesel, part of the engine air intake tract. The duct carries filtered air ...

Service Kit for the 1.8L K-Series four-cylinder petrol engine, grouping the scheduled engine and cabin filtration items into a single pack. The ki...

Oil Filler Cap for the engine oil filler neck on the camshaft cover, within the engine lubrication and crankcase ventilation assembly. The cap sea...

Brake Pipe is a rigid, pre-formed hydraulic line within the braking system. It carries pressurised brake fluid between the master cylinder, the AB...

Rear Brake Shoe Set for the rear drum brake assembly. Each shoe carries a bonded friction lining and is forced outward against the inner face of t...

Blade Fuse rated at 30 A. Standard blade-type fuse for the vehicle fusebox. It protects a single circuit by melting its internal element when curr...

EGR Valve for the exhaust gas recirculation circuit on the 2.0L L Series diesel engine. The valve meters a controlled quantity of exhaust gas from...

Crankshaft Position Sensor for the 2.0L I4 8V TCIE Rover diesel engine (L-Series), mounted at the cylinder block within the crankshaft, connecting ...

Camshaft Position Sensor for the 1.8L 4-cylinder K Series petrol engine, part of the engine management sensor group mounted at the cylinder head. ...

Lamp Guard - exterior protection for the front lamp unit, shielding the lens against stone chips, branch strikes and other impact damage on and off...

Radiator Hose - Top - upper radiator hose in the engine cooling circuit of the M47 2.0L 16-valve Td4 turbo diesel, manual transmission applications...

Bleed Hose is a small-bore coolant hose within the expansion tank and hose assembly of the engine cooling system. It vents air from the high point...

Clutch master cylinder for manual transmission applications, forming the hydraulic input to the clutch release circuit. Mounted on the pedal box a...

Heater Hose - Inlet - supply hose in the heater coolant circuit of the 2.0L 8-valve TCIE turbo diesel. It carries hot coolant from the engine to t...

Front Brake Disc Splash Shield, Right-Hand from the front brake disc and caliper assembly. The shield mounts behind the disc on the front hub carri...

Heater Hose - Outlet - return hose in the heater coolant circuit of the 2.0L 8-valve TCIE turbo diesel. It carries coolant back from the heater ma...

Adjusting Lever